Sabayon in Acer 11

Dears, Im with one doubt I have an Acer R11 and I try boot Sabayon, but the keyboard inst recognized. As my search this mode have the same hardware of Acer Chromebook R11 C5-132. All hardware was recognized minus the keyboard.

What to do

Thanks

HWINFO

cpu:
Intel® Celeron® CPU N3060 @ 1.60GHz, 1739 MHz
Intel® Celeron® CPU N3060 @ 1.60GHz, 480 MHz
keyboard:
Logitech Unifying Receiver
/dev/input/event3 AT Translated Set 2 keyboard
mouse:
Logitech Unifying Receiver
/dev/input/mice Elan Touchscreen
/dev/input/mice Elan Touchpad
monitor:
AUO LCD Monitor
graphics card:
Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
sound:
Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller
network:
wlp2s0 Intel Dual Band Wireless-AC 7265
network interface:
wlp2s0 Ethernet network interface
lo Loopback network interface
disk:
/dev/mmcblk0 Disk
/dev/mmcblk1 Disk
/dev/sda SanDisk Cruzer Blade
partition:
/dev/mmcblk0p1 Partition
/dev/sda1 Partition
/dev/sda2 Partition
/dev/sda3 Partition
usb controller:
Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller
bios:
BIOS
bridge:
Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1
Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU
Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register
Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #3
hub:
Linux Foundation 2.0 root hub
Linux Foundation 3.0 root hub
memory:
Main Memory
bluetooth:
Intel Bluetooth Device
unknown:
FPU
DMA controller
PIC
Keyboard controller
Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller
Serial controller
Realtek HD WebCam

lsw

lspci
00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 35)
00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 35)
00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 35)
00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 35)
00:1b.0 Audio device: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller (rev 35)
00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 (rev 35)
00:1c.2 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #3 (rev 35)
00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 35)
02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)


Vendor: usb 0x046d “Logitech, Inc.”
Device: usb 0xc534 “Unifying Receiver”
Revision: “29.00”
Compatible to: int 0x0200 0x0001 “Generic USB Mouse”
Driver: “usbhid”
Driver Modules: “usbhid”
Speed: 12 Mbps
Module Alias: “usb:v046DpC534d2900dc00dsc00dp00ic03isc01ip02in01”
Driver Info #0:
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #33 (Hub)

37: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: pBe4.xYNhIwdOaa6
Parent ID: MZfG.z6Zn2M1LpN8
SysFS ID: /devices/pci0000:00/0000:00:14.0/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: “Linux Foundation 3.0 root hub”
Hotplug: USB
Vendor: usb 0x1d6b “Linux Foundation”
Device: usb 0x0003 “3.0 root hub”
Revision: “5.11”
Serial ID: “0000:00:14.0”
Driver: “hub”
Driver Modules: “usbcore”
Module Alias: “usb:v1D6Bp0003d0511dc09dsc00dp03ic09isc00ip00in00”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #17 (USB Controller)

39: PS/2 00.0: 10800 Keyboard
[Created at input.226]
Unique ID: 9ui9.+49ps10DtUF
Hardware Class: keyboard
Model: “AT Translated Set 2 keyboard”
Vendor: 0x0001
Device: 0x0001 “AT Translated Set 2 keyboard”
Compatible to: int 0x0211 0x0001
Device File: /dev/input/event3
Device Files: /dev/input/event3, /dev/input/by-path/platform-i8042-serio-0-event-kbd
Device Number: char 13:67
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=new, avail=yes, need=no, active=unknown

40: PS/2 00.0: 10500 PS/2 Mouse
[Created at input.249]
Unique ID: AH6Q.BCYk6nODy52
Hardware Class: mouse
Model: “Elan Touchscreen”
Device: “Elan Touchscreen”
Compatible to: int 0x0210 0x0000
Device File: /dev/input/mice (/dev/input/mouse0)
Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event4, /dev/input/by-path/platform-808622C1:00-event
Device Number: char 13:63 (char 13:32)
Driver Info #0:
Buttons: 0
Wheels: 0
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown

41: PS/2 00.0: 10500 PS/2 Mouse
[Created at input.249]
Unique ID: AH6Q.wtWU2JjelDC
Hardware Class: mouse
Model: “Elan Touchpad”
Vendor: 0x04f3
Device: 0x002a “Elan Touchpad”
Compatible to: int 0x0210 0x0001
Device File: /dev/input/mice (/dev/input/mouse1)
Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event5, /dev/input/by-path/platform-808622C1:05-event-mouse, /dev/input/by-path/platform-808622C1:05-mouse
Device Number: char 13:63 (char 13:33)
Driver Info #0:
Buttons: 1
Wheels: 0
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown

42: None 00.0: 10103 CPU
[Created at cpu.462]
Unique ID: rdCR.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: “GenuineIntel”
Model: 6.76.4 “Intel® Celeron® CPU N3060 @ 1.60GHz”
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,tsc_reliable,nonstop_tsc,cpuid,aperfmperf,tsc_known_freq,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,sse4_2,movbe,popcnt,tsc_deadline_timer,aes,rdrand,lahf_lm,3dnowprefetch,epb,pti,ibrs,ibpb,stibp,tpr_shadow,vnmi,flexpriority,ept,vpid,tsc_adjust,smep,erms,dtherm,ida,arat,md_clear
Clock: 2066 MHz
BogoMips: 3201.33
Cache: 1024 kb
Units/Processor: 16
Config Status: cfg=new, avail=yes, need=no, active=unknown

43: None 01.0: 10103 CPU
[Created at cpu.462]
Unique ID: wkFv.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: “GenuineIntel”
Model: 6.76.4 “Intel® Celeron® CPU N3060 @ 1.60GHz”
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,tsc_reliable,nonstop_tsc,cpuid,aperfmperf,tsc_known_freq,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,sse4_2,movbe,popcnt,tsc_deadline_timer,aes,rdrand,lahf_lm,3dnowprefetch,epb,pti,ibrs,ibpb,stibp,tpr_shadow,vnmi,flexpriority,ept,vpid,tsc_adjust,smep,erms,dtherm,ida,arat,md_clear
Clock: 2480 MHz
BogoMips: 3201.33
Cache: 1024 kb
Units/Processor: 16
Config Status: cfg=new, avail=yes, need=no, active=unknown

44: None 00.0: 10701 Ethernet
[Created at net.126]
Unique ID: VV91.ndpeucax6V1
Parent ID: qru8.umvaSGpyXfC
SysFS ID: /class/net/wlp2s0
SysFS Device Link: /devices/pci0000:00/0000:00:1c.2/0000:02:00.0
Hardware Class: network interface
Model: “Ethernet network interface”
Driver: “iwlwifi”
Driver Modules: “iwlwifi”
Device File: wlp2s0
HW Address: c0:b6:f9:f7:74:7a
Permanent HW Address: c0:b6:f9:f7:74:7a
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #12 (WLAN controller)

45: None 00.0: 10700 Loopback
[Created at net.126]
Unique ID: ZsBS.GQNx7L4uPNA
SysFS ID: /class/net/lo
Hardware Class: network interface
Model: “Loopback network interface”
Device File: lo
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknow

This is most likely because Sabayon comes with an older LTS kernel. Its also possible the kernel doesn’t have the module compiled for the ChromeOS Keyboard. If you can try a more up-to-date kernel or plug in an external and compile a custom one that should fix it. I can do some research to see if we enable ChromeOS Keyboards by default. it’ll probably be some odd switch or module in hidden in the kernel config somewhere.

Could you gives support how to do this, i was migrating from apt distro . I alread worked with arch, debian, and red hat, Sabayon and Gentoo is my first time. Kinda lost